Suzuki Genuine Accessories

Note: Not in combination with aluminium skid plate (990D0-31J00-040/041) and plastic under cover (94400-06830-000). Required for installation of LED fog lamps (99000-990D2-220/221).

Required for installation of LED fog lamps (990D0-990D2-220/221) and for installation of aluminium skid plate (990D0-31J00-040/041).

This stylish accessory bar perfectly underlines the unique adventure touring look for the V-Strom 650. With a matte black powder coat finish.

This stylish accessory bar perfectly underlines the unique adventure touring look for the V-Strom 650. With a silver powder coat finish.

Replacement for the OE part which gives your bike a unique look. Made of aluminium.

Required for installation of aluminium side case (990D0-ALSC1-037/990D0-ALSC2-037)

The Black Aluminum Side Case Set is perfect for taking all the gear you need for a long weekend. Each case has a capacity of 37 liters and features 4 tie-down spots on the lid. Go prepared for your next adventure.

Required for Installation:
Side Case Carrier Set: 990D0-06L01-065
6 Piece Lock Set: 990D0-ALLOK-0B6

Max loading capacity: 3kg each.

The Silver Aluminum Side Case Set is perfect for taking all the gear you need for a long weekend. Each case has a capacity of 37 liters and features 4 tie-down spots on the lid. Go prepared for your next adventure.

Required for Installation:
Side Case Carrier Set: 990D0-06L01-065
6 Piece Lock Set: 990D0-ALLOK-0B6

Max loading capacity: 3kg each.

Accessory bar B (990D0-06L00-030) is required for installation. Not in combination with plastic under cover (94400-06830-000)

Accessory bar B (990D0-06L00-030) is required for installation. Not in combination with plastic under cover (94400-06830-000)

38 Litre
2 locks are required (990D0-ALLOK-082), Max loading capacity: 3kg

38 Litre
2 locks are required (990D0-ALLOK-082), Max loading capacity: 3kg

Note: In combination with Accessory Bar A (94200-06810). Not in combination with plastic under cover (94400-06830).

The assymetrical design of this axle protector has been directly inspired by the circuit. On one side there is a rounded impact body made of special plastic for best slipping characteristics (resistant against hits and abrasion). On the other side, a cone-shaped, milled aluminum body facilitates gripping by hand. The axle can be pulled out quickly and easily during the wheel change. Features: reduction of impact damage around front axle; unique design; easy to install.

The assymetrical design of this axle protector has been directly inspired by the circuit. On one side there is a rounded impact body made of special plastic for best slipping characteristics (resistant against hits and abrasion). On the other side, a cone-shaped, milled aluminum body facilitates gripping by hand. The axle can be pulled out quickly and easily during the wheel change. Features: reduction of impact damage around rear axle; unique design; easy to install.

Note. Image shows anodized red chain adjuster not included.

Front axle slider with S logo. Reduction of impact damage around front axle, unique design, easy to install.

Add to the comfort of your new V-Strom with the addition of a Top Case Backrest.

Suits: 35L Top Case 990D0-31JT2-SET

Made of steel with anodized aluminium cap with Suzuki logo. Set of two pieces.

Add both protection and style to your SV650, with this stylish Belly Pan Kit

A clear design meets the optimum handle length and shape for all applications. Double ball bearings make them superior to other hand levers regarding precision and response characteristics. This lever features adjustability in five positions, with a precise and smooth adjuster. Features folding lever and anodized red accents.

With Hayabusa logo. 4 adjustable and foldable aluminum lever.

A clear design meets the optimum handle length and shape for all applications. Double ball bearings make them superior to other hand levers regarding precision and response characteristics. This lever features adjustability in three positions, with a precise and smooth adjuster. Features folding lever and anodized red accents.

With Hayabusa logo. 4 adjustable and foldable aluminum lever.

This replacement for the OE part gives your bike a unique look. Made of aluminum with three different colored inserts. Choose from red, gold or blue.

This replacement for the OE part gives your bike a unique look. Made of aluminum with three different colored inserts. Choose from red, gold or blue.

"The Cut", Red decal stickers for front body cowling. Two-piece set for left and right hand side.

"The Edge", Red decal stickers for the front body cowling and rear cowling. Four-piece set for left and right hand side.

Side Case Brackets are required to install the side case set (93100-31820) on the V-Strom 650.

The main body is CNC made of high-end billet aluminum; the protecting piece is made of resistant plastic. This mix of materials helps these protectors achieve the best stability and flexibility. The downward-slope design leaves enough space to place the hand at the outside of the handlebar. Red accent spacers are included.

These high performance brake calipers are a joint development with Brembo and have been designed to ensure a precise and consistent braking performance. Brake pads and other single installation parts (eg. Screws, washers etc) are not included.

These high performance brake calipers are a joint development with Brembo and have been designed to ensure a precise and consistent braking performance. Brake pads and other single installation parts (eg. Screws, washers etc) are not included.

Carbon, matt finish, replaces OE-Part

Carbon, Matt finish

Carbon, matt finish

Carbon, Matt finish

Carbon, matt finish, replaces oe-part

RH: 990D0-17K32-CRB
LH: 990D0-17K30-CRB

Carbon, matt finish, replaces oe-part

RH: 990D0-17K32-CRB
LH: 990D0-17K30-CRB

Replacement for OE front fender. Carbon, Matt finish

Carbon, matt finish, replaces oe-part

Carbon, matt finish, replaces oe-part

RH: 990D0-17K25-CRB
LH: 990D0-17K24-CRB

Carbon, matt finish, replaces oe-part

RH: 990D0-17K25-CRB
LH: 990D0-17K24-CRB

Adapter plate necessary to install large top case 55LTR (990D0-E5500-000)

Adapter plate necessary to install aluminium top case 38L (990D0-ALTC2-038/990D0-ALTV2-038).

A useful accessory to bring your V-Strom 250 to a safe and stable standing position. Improves access to your bike for standard maintenance.

The V-Strom 650 center stand is ideal when stowing cargo, doing maintenance, and parking your V-Strom during your adventures.

Aluminum chain adjuster with Hayabusa logo. Supports you to easily and precisely adjust the chain tension, easier change of the rear wheel, full set for both sides.

Red anodized chain adjusters give your bike great aesthetics and functionality. You can easily and precisely adjust the chain tension, and more easily change the rear wheel. Set includes both left and right adjusters.

This elegant chain guard is not only a protective item but a real eye catcher, too. Made out of powder coated aluminum, it displays the V-Strom logo milled to the chain guard.

The main body is CNC made of high-end billet aluminum; the protecting piece is made of resistant plastic. This mix of materials helps these protectors achieve the best stability and flexibility. The downward-slope design leaves enough space to place the hand at the outside of the handlebar. Red accent spacers are included.

The chrome crankshaft hole plug replaces the stock plug to add a custom look.

The chrome crankshaft hole plug replaces the stock plug to add a custom look.

To prevent draining the battery, do not use the outlet during an engine stop. Please make sure to keep at 12W or less during idle.

The double bubble windscreen adds more style and aerodynamics to your sportbike, and considerably reduces wind pressure on the rider�s upper body and head. The bubble is 37mm higher than standard.

Stylish under cowling gives the V-Strom 650 a unique adventure-touring look..

Adjustable wide footrests features vibration dampening and adjustability up to 10 mm to the front and 3 positions in height, includes both left and right hand side.

Adjustable wide footrests features vibration dampening and adjustability up to 10 mm to the front and 3 positions in height, includes both left and right hand side.

The Black Frame Cover Kit is an excellent compliment to the meter visor, giving your SV a great Cafe Racer look.

The Red Frame Cover Kit is an excellent compliment to the meter visor, giving your SV a great Cafe Racer look.

Made of aluminium with nylon pad to reduce potential damages on your bike, two-piece set.

Carbon design sticker with red Suzuki logo. Protects the cap from scratches and gives the bike a classy look.

Not in combination with ring fixation for textile tank bags (990D0-04110-000)

Made of black grained protection foil. Four-piece set.

Protects the cap from scratches and gives the bike a classy look. Made of black grained protection foil.

Made of black grained protection foil. Four-piece set.

Carbon design, made of Evotec. Four-piece set.

Carbon design, made of Evotec. Four-piece set.

Carbon design, made of Evotec. Four-piece set.

Transparent protection foil with small Suzuki logo for LH and RH. For protection of tank against scratches in the area of your knees.

Set of two black protection foils for both sides (two pieces) that protect the tank against scratches in the area of your knees.

Set of two transparent protection foils for both sides (two pieces) that protect the tank against scratches in the area of your knees.

White Stripe Decal Kit to transform the look of your GSX-S1000.

White Checkered Decal Kit to transform the look of your GSX-S1000.

Complete decal set to transform the look of your GSX-S1000F.

With heat spot function. (All around of the grip is warmed but it makes you feel warm in the fingertips especially due to the temperature range.)

There is no such thing as bad weather once you have the best possible equipment. No matter how chilly it may be, these grip heaters will keep your fingers warm as long as you may ride.
The grip heaters have five different heat settings and a maximum power consumption of 17.2 Watt.

Made from aluminium and nylon, silver with black contrast and Suzuki logo.

Heated Grip Set plugs directly into the bike's original wiring harness. Kit includes both right and left grip assemblies, all required wiring and handlebar mounted adjustable heat controller.

Protect your heel plates with this attractive protection sticker set. Carbon effect

Rubber key ring, GSXR

Rubber key ring, RMZ

Hand guards for the V-Strom help protect against wind and debris.

Required: Clamp set (990D0-31J35-000) & Shroud set (990D0-31J30-000)

Locks and key set for installation of aluminium top case (990D0-ALTC1-038/990D0-ALTC2-038) aluminium side case (990D0-ALSC1-037/990D0-ALSC2-037).

Reduces the standard seat height by approx. 30mm. Gray/Black.

A convenient hook to attach bungee ties for securing luggage while touring.

Add the stylish Red Meter Visor to your SV650 to give your bike an individual look. The meter visor includes all the necessary parts for the easy installation.

Add the stylish White Meter Visor to your SV650 to give your bike an individual look. The meter visor includes all the necessary parts for the easy installation.

Small and effective meter visor. Improves wind protection and gives your KATANA a stylish image. Smoked colour.

Tough, poly-carbonate windscreen adds a sporty look and shields the instrument panel.

The mirror cover with carbon pattern design which makes the bike luxury look. Set of right and left side.

Taller riders will benefit from differently mounted rear view mirrors when riding. 51 mm higher mirror position adjustable up to 40mm sideways, two-piece set.

Your DR650SE has a unique feature that allows you to lower the height of the motorcycle up to 1.5 inches. If you do so, you will need this optional shorter side stand or the bike will stand too upright.

Black passenger pegs are a great replacement to the stock ones. Brackets included with pegs.

Not in combination with accessory bar A (94200-06810-000), aluminium under cowling (94200-06820-000, aluminium skid plate (990D0-31J00-040/041)

Four-piece set, Black grained

Four-piece set, Carbon design

Suzuki’s bi-directional quick shift system, clutch or throttle operation is unnecessary at the time of up shifting as well as down shifting.

Same as featured on the GSX-R1000R.

Made of durable nylon material with reflective piping with capacity of 9L. Including belts for fixation on the rear carrier.

Made of durable nylon material with reflective piping with capacity of 9L. Including belts for fixation on the rear carrier.

The rear bag is made of durable nylon material with reflective piping. It has a capacity of 9L expandable to 12L. Including a waterproof inner bag and fixation straps.

The rear bag is made of durable nylon material with reflective piping. It has a capacity of 9L expandable to 12L. Including a waterproof inner bag and fixation straps.

The rear bag is made of durable nylon material with reflective piping. It has a capacity of 9L expandable to 12L. Including a waterproof inner bag and fixation straps.

Perfect for taking along those little extras on the road or off.

Set of protection foil to protect the tail section

Transparent protection foil. Five-piece set.

Black Rear Sets (LIFT SIDE) are a replacement to the stock piece. Bracket will be included with the set.

Black Rear Sets (RIGHT SIDE) are a replacement to the stock piece. Bracket will be included with the set.

Rim decal with KATANA logo on the inner rim and Suzuki logo on the outer rim. Twelve-piece set for one wheel.

Ring Mount is required for installation of Large Ring Lock Tank Bag (990D0-04600) or Small Ring Lock Tank Bag (990D0-04300).

Ring Mount is required for installation of Large Ring Lock Tank Bag (990D0-04600) or Small Ring Lock Tank Bag (990D0-04300).

Required to install tank bag

Ring Mount is required for installation of Large Ring Lock Tank Bag (990D0-04600) or Small Ring Lock Tank Bag (990D0-04300).

Ring Mount is required for installation of Large Ring Lock Tank Bag (990D0-04600) or Small Ring Lock Tank Bag (990D0-04300). Also required is the Ring Mount Adapter (990D0-04610).

Ring Mount is required for installation of Large Ring Lock Tank Bag (990D0-04600) or Small Ring Lock Tank Bag (990D0-04300).

Not in combination with fuel cap protection sticker (990D0-17K04-BLK)

Requires Ring Mount Adapter: 990D0-04610

Replace your passenger pillion pad with an easy-to-install plastic cowl, giving your GSX-R a color-matched, race-inspired solo look.

Black (YKV): 45550-17810-YKV
Red (YVZ): 45550-17810-YVZ
Blue (YSF): 45550-17810-YSF

Seat Cowl provides a sporty, solo-seat look. Replaces the bike's pillion seat.

Elegant Side Case Sets retain the sporty and stylish appearance of the V-Strom while providing plenty of storage space. The 26L (6.8 Gal) and 29L (7.6 Gal) right and left Side Cases provide ample room for clothes, tools and other needs. Ships without keys, which are in-cluded with the purchase of your V-Strom.

Requires: Bracket Set, Side Case 93700-31820-000

Elegant Side Case Sets retain the sporty and stylish appearance of the V-Strom while providing plenty of storage space. The 26L (6.8 Gal) and 29L (7.6 Gal) right and left Side Cases provide ample room for clothes, tools and other needs.

Required for fitment:
Non XT Model: Bracket Set, Side Case 47500-06810 + Lower Plastic Side Case Bracket 93700-31840-000
XT Model: Lower Plastic Side Case Bracket 93700-31840-000

Upper set only. In combination with Side Case Lower Bracket Set (93700-31840-000). Required for installation of side case set (93100-31840-000).

Carbon design protection sticker for side panel in knee area. Two-piece set.

It expresses the integrated feeling with the rider by appealing the silhouette of streamlined shape from front to rear, which is one of the Identities of Hayabusa.

*B5L (Black / Gold) For unit color of B5L.
*B5M (Mat Silver / Red) For unit color of B5M.
*B5N (White / Mat Blue) For unit color of B5N.

Replace your pillion pad with an easy-to-install rear seat cowl, giving your GSX-S750 a clean solo look.

Also available:
Metallic Mat Black: 45500-13810-YKV
Pearl Mira Red: 45500-13810-YVZ

Help protect your DR650 from rocks and debris with the custom designed and factory engineered aluminum Skid Plate.

Durable nylon material with reflective piping, volume 11 litres expandable to 15 litres, rain cover and shoulder belt included.

Requires Tank Ring 99148-00A00-000 to fit

Durable nylon material with reflective piping, volume 5 litres expandable to 9 litres, rain cover and shoulder belt included.

Requires Tank Ring 99148-00A00-000 to fit

Durable nylon tank bag affixes to the tank with a snap-on ring. Bag removes with a simple pull of the release cord. Large bag expands from 11 to 15 liters (2.9 Gal to 3.9 Gal) and includes a rain cover and shoulder strap for convenient carrying.

Requires: Ring Mount Adaptor: 990D0-04610-000
Ring Mount: 990D0-04105-000

Durable nylon tank bag affixes to the tank with a snap-on ring. Bag removes with a simple pull of the release cord. Large bag expands from 11 to 15 liters (2.9 Gal to 3.9 Gal) and includes a rain cover and shoulder strap for convenient carrying.

Requires: Ring Mount Adaptor: 990D0-04610-000
Ring Mount: 990D0-04105-000

Durable nylon material with reflective piping, volume of 11 litres, expandable up to 15 litres, rain cover and shoulder belt included. Max load: 2.5kg, Max speed: 130km/h.

Durable nylon tank bag affixes to the tank with a snap-on ring. Bag removes with a simple pull of the release cord. Large bag expands from 11 to 15 liters (2.9 Gal to 3.9 Gal) and includes a rain cover and shoulder strap for convenient carrying.

Requires: Ring Mount Adaptor: 990D0-04610-000
Ring Mount: 990D0-04105-000

Durable nylon tank bag affixes to the tank with a snap-on ring. Bag removes with a simple pull of the release cord. Large bag expands from 11 to 15 liters (2.9 Gal to 3.9 Gal) and includes a rain cover and shoulder strap for convenient carrying.

Requires: Ring Mount 990D0-04105-000 (not in combination with fuel cap protection sticker)
Adaptor 990D0-04610-000

Durable nylon tank bag affixes to the tank with a snap-on ring. Bag removes with a simple pull of the release cord. Large bag expands from 11 to 15 liters (2.9 Gal to 3.9 Gal) and includes a rain cover and shoulder strap for convenient carrying.
Nylon adaptor included with bag.

Requires: Ring Mount: 990D0-04105-000

Durable nylon tank bag affixes to the tank with a snap-on ring. Bag removes with a simple pull of the release cord. It includes a rain cover and shoulder strap for convenient carrying.

Requires Ring Mount: 990D0-04105-000

Durable nylon tank bag affixes to the tank with a snap-on ring. Bag removes with a simple pull of the release cord. It includes a rain cover and shoulder strap for convenient carrying.

Requires Ring Mount: 990D0-04105-000

Durable nylon tank bag affixes to the tank with a snap-on ring. Bag removes with a simple pull of the release cord. It includes a rain cover and shoulder strap for convenient carrying.

Requires Ring Mount: 990D0-04105-000

Durable nylon tank bag affixes to the tank with a snap-on ring. Bag removes with a simple pull of the release cord. Large bag expands from 11 to 15 liters (2.9 Gal to 3.9 Gal) and includes a rain cover and shoulder strap for convenient carrying.

Requires: Ring Mount 990D0-04105-000 (not in combination with fuel cap protection sticker)

Durable nylon tank bag affixes to the tank with a snap-on ring. Bag removes with a simple pull of the release cord.It includes a rain cover and shoulder strap for convenient carrying.

Requires: Ring Mount: 990D0-04105-000

Carbon design tank pad with KATANA logo to protect the fuel tank against scratches. Two-piece set.

Protection sticker against scratches with Hayabusa kanji logo. With gold color in the part of sticker.

Protection sticker against scratches with Hayabusa kanji logo. With red color in the part of the sticker.

Tank pad with Suzuki logo to protect against scratches.

Tank pad with GSX-S logo to protect against scratches. 3 pcs set.

Tank pad with horizontal GSX-S logo to protect against scratches. 3 pcs set.

Help protect your fuel tank against scratches while enhancing the style of your motorcycle with this polyurethanecoated custom tank pad featuring the GSX-R logo. These exclusive tank pads are designed to reduce scratching and fading.

Transparent tank pad to assist in protecting the fuel tank from scratching.

Tank pad with GSX-S logo to protect against scratches. 3 pcs set.

Help protect your fuel tank against scratches while enhancing the style of your motorcycle with this polyurethanecoated custom tank pad featuring the GSX-R logo. These exclusive tank pads are designed to reduce scratching and fading.

Protection sticker against scratches. Transparent tank protection.

Required item to install tank bag large (p/n 990D0-04600-000) or tank bag small (p/n 990D0-04300-000).

Durable nylon tank bag affixes to the tank with a snap-on ring. Bag removes with a simple pull of the release cord. Large bag expands from 11 to 15 liters (2.9 Gal to 3.9 Gal) and includes a rain cover and shoulder strap for convenient carrying.

Requires: Fixation Ring: 990D0-04110-000

Durable nylon tank bag affixes to the tank with a snap-on ring. Bag removes with a simple pull of the release cord.It includes a rain cover and shoulder strap for convenient carrying.

Requires: Fixation Ring: 990D0-04110-000

Not in combination with plastic side case set (93100-31840-000), Max loading capacity: 3kg.

The Top Case Adapter plate is required to install the Top Case (990D0-B2700-000).

Image also shows Carrier 990D0-18K00-060

The Top Case Carrier is required to install the Top Case (990D0-B2700-000).

Image also shows Adapter Plate 990D0-99999-078

This high quality top case retains your V-Stroms sporty and stylish appearance, while providing 35 litres of storage space. It’s large enough to hold a full-face helmet. Kit includes Top Case Carrier Plate 93900-31820-000. (w/o Key)

Top Case, 35L: 93300-31820-000
Top Case Carrier: 93900-31820-000

27 Liter top case is suitable for a helmet or your daily gear.

The Top Case Carrier (990D0-18K00-060) and Top Case Adapter Plate (990D0-99999-078) are required for installation.

The shape of the wind screen is carefully designed to consider the whole shape of the bike, and this leads to keep the original image of the bike. Hayabusa logo is put on the sporty graphic of the wind screen which makes you feel ownership of this bike.

This wind screen is 10cm higher than standard, it improves wind and weather protection even for taller riders

The Tuck Roll Style Seat was designed to bring out the real Cafe Racer look of your SV650. It is 5mm higher than the original seat and thanks to the larger upholstery, also giving you more comfort. The two-tone color of the Katakana Suzuki logo gives the seat an appealing look.

Wheel decal with Hayabusa logo. Gold color. Set of 6 stickers for one wheel.

Wheel decal with Hayabusa logo. Red color. Set of 6 stickers for one wheel.

Easy-to-install decals allow you to add accent colors to your wheels. GSX-S logo decal set features the GSX-S logo and a checkered flag pattern and installs on the inside wheel surface as shown.

One kit will complete both sides of one wheel.

Black foil printed with yellow lines and GSX-R logo. Four-piece-set for one wheel.

Red foil with Suzuki logo. Six-piece-set for one wheel.

Red foil with Suzuki logo. Six-piece-set for one wheel.

Red foil with Suzuki logo. Six-piece-set for one wheel.

Red foil with Suzuki logo. Six-piece-set for one wheel.

Black foil printed with red line design and Suzuki logo. Six-piece-set for one wheel.

Black foil printed with red line design and Suzuki logo. Six-piece-set for one wheel.

Black foil printed with red line design and Suzuki logo. Six-piece-set for one wheel.

Black foil printed with red line design and Suzuki logo. Six-piece-set for one wheel.

With “SV” logo which can easily be applied to the wheel. Six-piece set for one wheel.

Customize the appearance of your V-Strom with these wheel decals featuring the V-Strom logo

Front Wheel 19": 990D0-31JF5-PAD
Rear Wheel 17": 990D0-31JR5-PAD

Customize the appearance of your V-Strom with these wheel decals featuring the V-Strom logo

Front Wheel 19": 990D0-31JF5-PAD
Rear Wheel 17": 990D0-31JR5-PAD

Carbon design with GSX-R logo, protects against scratches. Two-piece set.